Installation Instructions: Permanent Adhesive Mount
Click here to download the PDF version of these step by step instructions with images
To obtain peak performance and longest product life of the Millennium Antennas from Antenna Plus, the mounting surface should be free of any oil or contaminants and of obstructing metal objects near the antenna. The mounting surface should be at room temperature or a minimum of 50 degrees Fahrenheit.
- Drill a .75” Diameter hole where the center of the antenna will be located on the vehicle.
- Where the antenna will mount to the vehicle, clean the surface with the alcohol wipe to remove dust, dirt and oil.
- After the alcohol has evaporated, apply the adhesion promoter only to the surface where the antenna’s adhesive pad will be applied.
- While the adhesion promoter dries, pass antenna cables through the hole.
- Remove the backing on the bottom of the antenna exposing the adhesive pad.
- Position the antenna and stick it to the vehicle using firm hand pressure.
Click here to download the PDF version of these step by step instructions with images
